| Author |
Message |
|
| 2strokd |
 Posted: Tue Apr 20, 2010 8:02 am |
 |
|
Joined: 28 Oct 2009
Posts: 273
Location: Lafayette IN
|
Not much for power yet but its fun non the less!  |
_________________
01 CPI Misketo MZ- Drag scooter
01 Aprilia SR50 DiTech-Being parted out!
03 Kymco Cobra- Daily driver |
|
| Back to top |
 
|
| scootertrog |
| Posted: Tue Apr 20, 2010 11:09 am |
|
|
Joined: 12 Jul 2007
Posts: 1142
Location: SW Missouri
|
More pics? Do you not use a seat to sit on?
I had an '02 Mz RX50, it was my first scoot.
scootertrog |
|
|
| Back to top |
|
| 2strokd |
| Posted: Tue Apr 20, 2010 3:56 pm |
|
|
|
Joined: 28 Oct 2009
Posts: 273
Location: Lafayette IN
|
Heres a few. I stripped an extra seat i had just for race use.
Heres a little vid of it outta tune with a new set-up.
 |
_________________
01 CPI Misketo MZ- Drag scooter
01 Aprilia SR50 DiTech-Being parted out!
03 Kymco Cobra- Daily driver |
|
| Back to top |
|
| Timmy |
| Posted: Tue Apr 20, 2010 6:01 pm |
|
|
|
Joined: 02 Sep 2008
Posts: 141
Location: Dearborn Heights MI
|
2stroked nice cpi mz and i really like the front faring on there looks killer.What kind of performance pipe are you using? |
_________________
2003 Aprilia sr 50 ditech
Mods
Pionner head unit
Red neons and leds
Malossi 6.5 gram rollers
Malossi yellow contra spring
Malossi delta clutch
Dragon custom air intake
Leo vince rr pipe
Gates power belt
Triple chrome rims |
|
| Back to top |
|
| 2strokd |
| Posted: Wed Apr 21, 2010 8:03 am |
|
|
|
Joined: 28 Oct 2009
Posts: 273
Location: Lafayette IN
|
Thanks Timmy, i see you also have a DiTech. Great rides, such good mileage!
In the vid im running a lil Leo ZX, but i have a good custom built pipe from 190mech that i will be running later 
 |
_________________
01 CPI Misketo MZ- Drag scooter
01 Aprilia SR50 DiTech-Being parted out!
03 Kymco Cobra- Daily driver |
|
| Back to top |
|
| Timmy |
| Posted: Wed Apr 21, 2010 11:40 am |
|
|
|
Joined: 02 Sep 2008
Posts: 141
Location: Dearborn Heights MI
|
2strokd wrote: Thanks Timmy, i see you also have a DiTech. Great rides, such good mileage!
In the vid im running a lil Leo ZX, but i have a good custom built pipe from 190mech that i will be running later
Thanks for the comment 2 stroked.What is the custom pipe from 190 mech from and what cyilnder is it suppose to run 50cc 70cc? |
_________________
2003 Aprilia sr 50 ditech
Mods
Pionner head unit
Red neons and leds
Malossi 6.5 gram rollers
Malossi yellow contra spring
Malossi delta clutch
Dragon custom air intake
Leo vince rr pipe
Gates power belt
Triple chrome rims |
|
| Back to top |
|
| 2strokd |
| Posted: Thu Apr 22, 2010 7:56 am |
|
|
|
Joined: 28 Oct 2009
Posts: 273
Location: Lafayette IN
|
The pipe is a custom one off that 190mech (member here) built for me.
Its built for a 70cc, port timing set at 195/135. It should do well up to about
11,000-12,000 RPM. 190mech is very good at building pipes, it takes skill and knowhow. Its over my head. Thanks 190mech! I believe this pipe was his third one. All hand cut and rolled! |
_________________
01 CPI Misketo MZ- Drag scooter
01 Aprilia SR50 DiTech-Being parted out!
03 Kymco Cobra- Daily driver |
|
| Back to top |
|
| 2strokd |
| Posted: Mon Jun 07, 2010 10:37 pm |
|
|
|
Joined: 28 Oct 2009
Posts: 273
Location: Lafayette IN
|
A little update. Running strong with Polini Corsa Sport kit, 190mech,s TINMAN pipe, and the rest of the goodies....Put on the 12inch wheels ive been wanting to put on. I like em lots better than the 10,s overall! Need new tires tho bad! Here it is with the Leo still on.
And here it is with the TINMAN
 |
_________________
01 CPI Misketo MZ- Drag scooter
01 Aprilia SR50 DiTech-Being parted out!
03 Kymco Cobra- Daily driver |
|
| Back to top |
|
| 2strokd |
| Posted: Fri Jun 11, 2010 1:14 pm |
|
|
|
Joined: 28 Oct 2009
Posts: 273
Location: Lafayette IN
|
Under the hood 
Oil for fill-ups and a flashlight is all i carry :-/. Ohh, and my airfreshener of course 
Skeedr with Mikes 07 DiTech
Check out the Stage6 rotor 
 |
_________________
01 CPI Misketo MZ- Drag scooter
01 Aprilia SR50 DiTech-Being parted out!
03 Kymco Cobra- Daily driver |
|
| Back to top |
|
| F10Pilot |
| Posted: Fri Jun 11, 2010 3:47 pm |
|
|
Joined: 03 Apr 2008
Posts: 182
Location: Maine
|
That custom pipe KILLS!!
What cylinder are you using with it? How does it run?
I agree the giant brake rotor is sweet but nothing beats the rockstar factor of a one off exhaust. Is it all rolled mild steel? What gauge? |
_________________
Malaguti F10 - Flies like a butterfly - Sounds like a bee. |
|
| Back to top |
|
| 2strokd |
| Posted: Fri Jun 11, 2010 11:15 pm |
|
|
|
Joined: 28 Oct 2009
Posts: 273
Location: Lafayette IN
|
Thanks F10Pilot ! I gotta agree, that lil pipe rocks!
Its a one off built by 190mech. I run it with a box stock Polini
Corsa Sport and im very impressed with how it runs! |
_________________
01 CPI Misketo MZ- Drag scooter
01 Aprilia SR50 DiTech-Being parted out!
03 Kymco Cobra- Daily driver |
|
| Back to top |
|
| 2strokd |
| Posted: Mon Jul 26, 2010 8:20 am |
|
|
|
Joined: 28 Oct 2009
Posts: 273
Location: Lafayette IN
|
I worked on my cvt a bit to try and get the launch better. I still need to port match the "box stock" Corsa Sport exhaust port to match the C-17 header flange. I think it pulls pretty good for what it is. What do you all think?
http://www.youtube.com/watch?v=MQwovgpy268 |
_________________
01 CPI Misketo MZ- Drag scooter
01 Aprilia SR50 DiTech-Being parted out!
03 Kymco Cobra- Daily driver |
|
| Back to top |
|
| 190mech |
| Posted: Mon Jul 26, 2010 8:00 pm |
|
|
|
Joined: 01 Oct 2009
Posts: 99
|
| Tune on!You have the magic touch with the CVT system!! |
|
|
| Back to top |
|
| 2strokd |
| Posted: Tue Jul 27, 2010 1:33 pm |
|
|
|
Joined: 28 Oct 2009
Posts: 273
Location: Lafayette IN
|
Thanks 190mech ! That pipe sure has allot to do with it 
I was able to test some in a very short area...Ran a few 0-30MPH runs and it went like this
1st run. Wheel came up(messes the test up) and went 2.95sec.
2nd run. 2.65sec.
3rd run. 2.36 seconds.
Im happy with that! |
_________________
01 CPI Misketo MZ- Drag scooter
01 Aprilia SR50 DiTech-Being parted out!
03 Kymco Cobra- Daily driver |
|
| Back to top |
|
| 190mech |
| Posted: Tue Jul 27, 2010 8:11 pm |
|
|
|
Joined: 01 Oct 2009
Posts: 99
|
Need to fab up some wheelie bars for the strip!!  |
|
|
| Back to top |
|
|
|
